Add IP Address to VE Interface 200 on Device 3

C

The correct command set to add an IP address to VE interface 200 on device 3 in a virtual chassis where device 1 is the vMaster depends on the specific A10 Networks' operating system version in use, as different versions may have slightly different syntax for this task.

However, based on the options given, we can make an educated guess as to which one is most likely the correct command set.

Option A:

kotlinCopy code
interface ve 200 device 3 ip address 198.162.4.1 /24 

This command set seems incorrect because it specifies "device 3" after "ve 200", which is not a valid syntax in A10 Networks' operating systems.

Option B:

goCopy code
interface device-context 3 interface ve 200 ip address 198.162.4.1 /24 

This command set is also incorrect because it does not specify the VCS (Virtual Chassis System) context in which the VE interface resides.

Option C:

kotlinCopy code
interface ve 3/200 ip address 198.162.4.1 /24 

This command set seems incorrect because it uses "ve 3/200" instead of "ve 200", which is not a valid syntax in A10 Networks' operating systems.

Option D:

kotlinCopy code
vcs device-context device 3 interface ve 200 ip address 198.162.4.1 /24 

This command set is the most likely correct option because it specifies the VCS context ("vcs device-context") and device 3 ("device 3") before specifying the VE interface ("interface ve 200") and the IP address ("ip address 198.162.4.1 /24").

Therefore, the correct answer is D.