Question 68 of 76 from exam 010-151-DCTECH: Supporting Cisco Data Center System Devices

Question 68 of 76 from exam 010-151-DCTECH: Supporting Cisco Data Center System Devices

Question

DRAG DROP - Drag the password recovery procedures on a Cisco NX-OS switch from the left to the right and place them in order.

Select and Place:

Log in to the switch using the new administrator password. Step 1

Reset the network administrator password. Step 2

Load the Cisco NX-OS system software image. Step 3

Power-cycle the switch. Step 4

Reset the new password to ensure thatis itis also the Simple Network Management step 5

Protocol (or SNMP) password.

To enter the boot prompt mode, press the Ctri-] key sequence from the console port step 6
session when the switch begins the Cisco NX-OS software boot sequence.

Save the configuration. Step7

Display the bootflash: contents to locate the Cisco NX-OS software image. Step 8

Explanations

Log in to the switch using the new administrator password.

Power-cycle the switch.

Reset the network administrator password.

To enter the boot prompt mode, press the Ctrl-] key sequence from the console port
session when the switch begins the Cisco NX-OS software boot sequence.

Load the Cisco NX-OS system software image.

Reset the network administrator password.

Power-cycle the switch.

Display the bootflash: contents to locate the Cisco NX-OS software image.

Reset the new password to ensure thatis itis also the Simple Network Management
Protocol (or SNMP) password.

Load the Cisco NX-OS system software image.

To enter the boot prompt mode, press the Ctrl-] key sequence from the console port
session when the switch begins the Cisco NX-OS software boot sequence.

Log in to the switch using the new administrator password.

Save the configuration.

Reset the new password to ensure thatis itis also the Simple Network Management
Protocol (or SNMP) password.

Display the bootflash: contents to locate the Cisco NX-OS software image.

Save the configuration.