Check any website status at: Is Web Down?

Question 6 of 92 from exam 300-410-ENARSI: Implementing Cisco Enterprise Advanced Routing and Services

Question 6 of 92 from exam 300-410-ENARSI: Implementing Cisco Enterprise Advanced Routing and Services

Prev Question Next Question

Question

Refer to the exhibit.

An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen.

What is the reason for this?

Router#show running-config | include ip route
ip route 192.168.2.2 255.255.255.255 209.165.200.225 130
Router#show ip route

<output omitted>
Gateway of last resort is not set

192.168. 1.0/32 is subnetted, 1 subnets
192.168.1.1 is directly connected, Loopback0
192.168.2.0/32 is subnetted, 1 subnets
192.168.2.2[110/11] via 192.168.12.2, 00:52:09, Ethernet0/0
192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks
192.168.12.0/24 is directly connected, Ethernet0/0
192.168.12.1/32 is directly connected, Ethernet0/0
209.165.200.0/24 is variably subnetted, 2 subnets, 2 masks
209.165.200.0/24 is directly connected, Ethernet0/1
209.165.200.226/32 is directly connected, Ethernet0/1

Answers

A. Dynamic routing protocols always have priority over static routes.

B. The metric of the OSPF route is lower than the metric of the static route.

C. The configured AD for the static route is higher than the AD of OSP.

D. The syntax of the static route is not valid, so the route is not considered.

Explanations

Click on the arrows to vote for the correct answer

A. B. C. D.

C.

Prev Question Next Question