Question 34 of 56 from exam 300-730-SVPN: Implementing Secure Solutions with Virtual Private Networks

Question 34 of 56 from exam 300-730-SVPN: Implementing Secure Solutions with Virtual Private Networks

Prev Question Next Question

Question

rbeginning Main Mode exchange (0):sending packet to 192.168.0.8 my_port 500 peer_port 500 (I) MM NO STATE (0) :received packet from 192.168.0.8 dport 500 sport 500 Global (I) MM_NO_STATE Old State = IKE_I MM1 New State = IKE_I_MM2 :found peer pre-shared key matching 192.168.0.8 tlocal preshared key found :Checking ISAKMP transform 1 against priority 10 policy : encryption AES-CBC keylength of 256 hash SHA2S6 default group 14 auth pre-share life type in seconds : life duration (basic) of 1200 atts are acceptable. Next payload is 0 (0):sending packet to 192.168.0.8 my_port 500 peer_port 500 (I) MM SA_SETUP ISAKMP: (0):O1d State = IKE I MM2 New State = IKE_I_MM3 ISAKMP-PAK: (0):received packet from 192.168.0.8 dport 500 sport 500 Global (I) MM_SA_SETUP ISAKMP: (0):O1ld State = IKE_I MM3 New State = IKE _I_MMé ISAKMP: (0):found peer pre-shared key matching 192.168.0.8 ISAKMP: (1005) :0ld State = IKE_I_MM4 New State = IKE_I_MM4 ISAKMP: (1005) :pre-shared key authentication using id type ID_IPV4_ADDR ISAKMP-PAK: (1005) :sending packet to 192.168.0.8 my_port 4500 peer_port 4500 (I) MM_KEY EXCH ISAKMP: (1005):0ld State = IKE I MM4 New State = IKE_I_MMS ISAKMP-PAK: (1005) :received packet from 192.162.0.8 dport 500 sport 500 Global (I) MM KEY EXCH ISAKMP: (1005):phase 1 packet is a duplicate of a previous packet. ISAKMP: (1005) :retransmitting due to retransmit phase 1 ISAKMP: (1005):retransmitting phase 1 MM KEY EXCH... ISAKMP: (1005):: incrementing error counter on sa, attempt 1 of 5: retransmit phase 1 ISAKMP-PAK: (1005) :sending packet to 192.168.0.8 my_port 4500 peer_port 4500 (I) MM KEY EXCH ISAKMP-PAK: (1005) :received packet from 192.1628.0.@ dport 500 sport 500 Global (I) MM KEY EXCH ISAKMP: (1005):phase 1 packet is a duplicate of a previous packet. ISAKMP: (1005) :retransmitting due to retransmit phase 1

Refer to the exhibit.

A site-to-site tunnel between two sites is not coming up.

Based on the debugs, what is the cause of this issue?

Answers

Explanations

Click on the arrows to vote for the correct answer

A. B. C. D.

C.

Prev Question Next Question