When enabling jumbo frames on a network device, which of the following parameters is being adjusted?
A.
Speed B.
Duplex C.
MTU D.
TTL.
C.
When enabling jumbo frames on a network device, which of the following parameters is being adjusted?
A.
Speed
B.
Duplex
C.
MTU
D.
TTL.
C.
When enabling jumbo frames on a network device, the parameter being adjusted is the Maximum Transmission Unit (MTU).
MTU is the largest size of data packet that can be transmitted over a network without fragmentation. By default, the MTU for Ethernet networks is 1500 bytes. However, jumbo frames increase this limit to up to 9000 bytes, allowing for larger amounts of data to be transmitted in a single packet.
Enabling jumbo frames requires support from all devices on the network, including switches, routers, and network interface cards (NICs). If any device on the network does not support jumbo frames, then the communication between devices that are using jumbo frames will result in fragmentation and reduced network performance.
It is important to note that enabling jumbo frames does not necessarily improve network performance. It can provide a slight improvement in some specific use cases, such as large file transfers, but it can also lead to decreased performance in certain situations due to increased overhead and potential fragmentation.
To summarize, jumbo frames adjust the MTU parameter, which defines the maximum packet size that can be transmitted over the network without fragmentation. Enabling jumbo frames requires support from all network devices and may not necessarily improve network performance.