After starting an operating system installation from DVD, a system administrator goes to work on another task and comes back to find the server back at the installation start screen.
Which of the following should be done to correct this problem?
Click on the arrows to vote for the correct answer
A. B. C. D.B.
The problem described in this scenario suggests that the server is restarting or crashing during the installation process, causing it to loop back to the start screen. This could be due to a hardware or software issue.
To correct the problem, there are a few steps that the system administrator can take:
A. Try installation again with a different DVD: This option may be necessary if the DVD used for the installation is damaged or corrupted. However, it is not the best solution to try first since the problem may not be related to the DVD.
B. Modify the device boot order in the BIOS: This option is likely the best solution to try first. By changing the boot order, the system administrator can ensure that the installation process is started from the correct device. For example, if the installation is being performed from a DVD, the DVD drive should be set as the first boot device in the BIOS.
C. Monitor the operating system installation process completely this time: This option may help the system administrator identify any errors or issues that are causing the installation process to fail. By monitoring the process, they can observe at which stage the installation fails, which may provide clues as to what is causing the problem.
D. Swap the hard drive with a known working one: This option is not a practical solution as it involves swapping the hard drive and starting the installation process again from scratch. It may be necessary if there is a hardware issue with the original hard drive, but it is not a recommended first step.
In summary, the best solution to correct the problem described in the scenario is to modify the device boot order in the BIOS to ensure that the installation process is started from the correct device. If this solution does not work, the system administrator can try monitoring the installation process to identify any errors or issues.