Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?
Click on the arrows to vote for the correct answer
A. B. C. D.B.
None of the answer choices provided are appropriate for mounting Access Points (APs) in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell. Therefore, we cannot provide an accurate and detailed explanation for any of the answer choices.
However, in general, the placement of APs in a high-density wireless network is critical to ensure proper coverage, capacity, and performance. The ideal placement of APs depends on various factors such as the building layout, size, construction materials, RF interference, and the number of clients.
To provide 6 dB to 20 dB of attenuation to a cell, the APs must be placed strategically to reduce the signal strength in a particular area, which is typically done by positioning the APs in such a way that their radio signals are blocked or absorbed by walls, ceilings, or other obstacles. This can be achieved by placing the APs in corridors, along walls, or in rooms adjacent to the area requiring the attenuation.
Furthermore, it's essential to ensure that the APs are not too close to each other to prevent co-channel interference, which can cause performance degradation and reduced network capacity. In high-density areas, APs may need to be placed closer together than in other areas to provide adequate coverage and capacity.
In conclusion, the placement of APs in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell requires careful planning and consideration of various factors, including the building layout, obstacles, and interference sources. Therefore, it's essential to consult a wireless network expert or follow the vendor's guidelines for the best results.