Question 313 of 405 from exam JN0-102: Juniper Networks Certified Associate Junos

Prev Question Next Question

Question

-- Exhibit

-- Exhibit --

Referring to the exhibit, you are asked to rate-limit traffic from Web-Server to the subnet where Mal-User is located. All other traffic should be permitted.

Which firewall filter configuration do you use?

Answers

A. [edit firewall] user@router# show policer LIMIT-MAL-USER { if-exceeding { bandwidth-limit 400k; burst-size-limit 100k; } then discard; } familyinet { filter STOP-MAL-USER { term one { from { source-address { 100.100.100.10/32; } destination-address { 200.200.200.0/24; } } thenpolicer LIMIT-MAL-USER; } term two { then accept; } } }

B. [edit firewall] user@router# show policer LIMIT-BAD-USER { if-exceeding { bandwidth-limit 400k; burst-size-limit 100k; } then discard; } familyinet { filter STOP-MAL-USER { term one { from { source-address { 100.100.100.10/32; } destination-address { 200.200.200.0/24; } } thenpolicer LIMIT-MAL-USER; } term two { then accept; } } }

C. [edit firewall] user@router# show policer LIMIT-MAL-USER { if-exceeding { bandwidth-limit 400k; burst-size-limit 100k; } then discard; } familyinet { filter STOP-MAL-USER { term one { from { source-address { 100.100.100.10/32; } destination-address { 200.200.200.0/24; } } thenpolicer LIMIT-MAL-USER; } term two { then reject; } } }

D. [edit firewall] user@router# show policer LIMIT-MAL-USER { if-exceeding { bandwidth-limit 400k; burst-size-limit 100k; } then discard; } familyinet { filter STOP-MAL-USER { term one { from { source-address { 200.200.200.0/24; } destination-address { 100.100.100.10/32; } } thenpolicer LIMIT-MAL-USER; } term two { then accept; } }

Show Answer

Explanations

Click on the arrows to vote for the correct answer

A. B. C. D.

Prev Question Next Question