If you want multiple hosts on a network, where do you configure the setting?
Click on the arrows to vote for the correct answer
A. B. C. D.A
To configure settings for multiple hosts on a network, you need to configure the IP addressing settings on the networking devices that are responsible for routing traffic between the hosts. This typically involves configuring the network address and subnet mask for the network segment that the hosts are connected to, as well as configuring any necessary routing protocols.
The correct answer to the exam question is A. In the IP protocol. The IP protocol is responsible for providing unique addressing for each device on the network, and for routing packets between devices based on those addresses. To configure IP addressing settings, you can use a variety of methods, depending on the networking device and the software it is running. Some common methods include using a command-line interface (CLI) to enter configuration commands directly on the device, using a graphical user interface (GUI) provided by the device manufacturer, or using a third-party network management tool.
Configuring IP addresses for multiple hosts on a network typically involves assigning each host a unique IP address within the network segment, and configuring the subnet mask to define the range of addresses that are considered part of the same network. For example, if you have a network segment with a network address of 192.168.1.0 and a subnet mask of 255.255.255.0, you could assign IP addresses to hosts in the range of 192.168.1.1 to 192.168.1.254.
In addition to configuring IP addresses, you may also need to configure routing protocols to ensure that traffic is correctly routed between hosts on different network segments. Routing protocols such as OSPF or BGP can be used to dynamically exchange routing information between networking devices, allowing them to build and maintain a routing table that can be used to forward packets to their destination.
In summary, to configure settings for multiple hosts on a network, you need to configure the IP addressing settings on the networking devices that are responsible for routing traffic between the hosts. This typically involves configuring IP addresses and subnet masks for each host, and configuring routing protocols to ensure that traffic is correctly routed between different network segments.