CISA Exam: Correct Sequence of Business Process Reengineering (BPR) Application Steps

Correct Sequence of BPR Application Steps

Prev Question Next Question

Question

Identify the correct sequence of Business Process Reengineering (BPR) application steps from the given choices below?

Answers

Explanations

Click on the arrows to vote for the correct answer

A. B. C. D.

A.

The correct sequence of BRP application step is Envision, Initiate, Diagnose, Redesign, Reconstruct and Evaluate.

For your exam you should know the information below: Overview of Business Process Reengineering One of the principles in business that remains constant is the need to improve your processes and procedures.

Most trade magazines today contain discussions of the detailed planning necessary for implementing change in an organization.

The concept of change must be accepted as a fundamental principle.

Terms such as business evolution and continuous improvement ricochet around the room in business meetings.

It's a fact that organizations which fail to change are destined to perish.

As a CISA, you must be prepared to investigate whether process changes within the organization are accounted for with proper documentation.

All internal control frameworks require that management be held responsible for safeguarding all the assets belonging to their organization.

Management is also responsible for increasing revenue.

BPR Application Steps - ISACA cites six basic steps in their general approach to BPR.

These six steps are simply an extension of Stewart's Plan-Do-Check-Act model for managing projects: Envision -Visualize a need (envision)

Develop an estimate of the ROI created by the proposed change.

Elaborate on the benefit with a preliminary project plan to gain sponsorship from the organization.

The plan should define the areas to be reviewed and clarify the desired result at the end of the project (aka end state objective)

The deliverables of the envision phase include the following: Project champion working with the steering committee to gain top management approval Brief description of project scope, goals, and objectives description of the specific deliverables from this project with a preliminary charter to evidence management's approval, the project may proceed into the initiation phase.

Initiate -This phase involves setting BPR goals with the sponsor.

Focus on planning the collection of detailed evidence necessary to build the subsequent BPR plan for redesigning the process.

Deliverables in the initiation phase include the following: Identifying internal and external requirements (project specifications) Business case explaining why this project makes sense (justification) and the estimated return on investment compared to the total cost (net ROI) Formal project plan with budget, schedule, staffing plan, procurement plan, deliverables, and project risk analysis Level of authority the BPR project manager will hold and the composition of any support committee or task force that will be required From the profit and loss (P&L) statement, identify the item line number that money will be debited from to pay for this project and identify the specific P&L line number that the financial return will later appear under (to provide strict monitoring of the ROI performance) Formal project charter signed by the sponsors It's important to realize that some BPR projects will proceed to their planned conclusion and others may be halted because of insufficient evidence.

After a plan is formally approved, the BPR project may proceed to the diagnostic phase.

Diagnose Document existing processes.

Now it's time to see what is working and identify the source of each requirement.

Each process step is reviewed to calculate the value it creates.

The goal of the diagnostic phase is to gain a better understanding of existing processes.

The data collected in the diagnostic phase forms the basis of all planning decisions: Detailed documentation of the existing process Performance measurement of individual steps in the process Evidence of specific process steps that add customer value Identification of process steps that don't add value Definition of attributes that create value and quality Put in the extra effort to do a good job of collecting and analyzing the evidence.

All future assumptions will be based on evidence from the diagnostic phase.

Redesign- Using the evidence from the diagnostic phase, it's time to develop the new process.

This will take several planning iterations to ensure that the strategic objectives are met.

The formal redesign plans will be reviewed by sponsors and stakeholders.

A final plan will be presented to the steering committee for approval.

Here's an example of deliverables from the redesign phase.

Comparison of the envisioned objective to actual specifications Analysis of alternatives (AoA) Prototyping and testing of the redesigned process Formal documentation of the final design The project will need formal approval to proceed into the reconstruction phase.

Otherwise, the redesign is halted pending further scrutiny while comparing the proposed design with available evidence.

Insufficient evidence warrants halting the project.

Reconstruct With formal approval received, it's time to begin the implementation phase.

The current processes are deconstructed and reassembled according to the plan.

Reconstruction may be in the form of a parallel process, modular changes, or complete transition.

Each method presents a unique risk and reward opportunity.

Deliverables from this phase include the following: Conversion plan with dependencies in time sequence Change control management - Execution of conversion plan with progress monitoring Training of users and support personnel Pilot implementation to ensure a smooth migration Formal approval by the sponsor.

The reconstructed process must be formally approved by management to witness their consent for fitness of use.

IT governance dictates that executive management shall be held responsible for any failures and receive recognition for exceptional results.

System performance will be evaluated again after entering production use.

Evaluate (post evaluation) The reconstructed process is monitored to ensure that it works and is producing the strategic value as forecast in the original justification.

Comparison of original forecast to actual performance Identification of lessons learned Total quality management plan to maintain the new process A method of continuous improvement is implemented to track the original goals against actual process performance.

Annual reevaluation is needed to adapt new requirements or new opportunities.

Benchmarking as a BPR Tool - Benchmarking is the process of comparing performance data (aka metrics)

It can be used to evaluate business processes that are under consideration for reengineering.

Performance data may be obtained by using a self-assessment or by auditing for compliance against a standard (reference standard)

Evidence captured during the diagnostic phase is considered the key to identifying areas for performance improvement and documenting obstacles.

ISACA offers the following general guidelines for performing benchmarks: Plan Identify the critical processes and create measurement techniques to grade the processes.

Research Use information about the process and collect regular data (samples) to build a baseline for comparison.

Consider input from your customers and use analogous data from other industries.

Observe Gather internal data and external data from a benchmark partner to aid the comparison results.

Benchmark data can also be compared against published standards.

Analyze Look for root cause-effect relationships and other dependencies in the process.

Use predefined tools and procedures to collate the data collected from all available sources.

Adapt Translate the findings into hypotheses of how these findings will help or hurt strategic business goals.

Design a pilot test to prove or disprove the hypotheses.

Improve Implement a prototype of the new processes.

Study the impact and note any unexpected results.

Revise the process by using controlled change management.

Measure the process results again.

Use reestablished procedures such as total quality management for continuous improvement.

The following answers are incorrect: The other options specified does not represent the correct sequence of BRP application steps.

Business Process Reengineering (BPR) is a management approach that aims to improve business processes to achieve significant and sustainable results. It involves a series of steps that need to be executed in a sequence to achieve successful outcomes. The correct sequence of BPR application steps is:

B. Initiate, Envision, Diagnose, Redesign, Reconstruct, and Evaluate.

Explanation of each step:

  1. Initiate: The first step in BPR is to initiate the process by identifying the problem or opportunity that requires reengineering. The focus should be on the key performance indicators (KPIs) such as cost, quality, time, and customer satisfaction. The objectives and goals of the reengineering process should also be defined.

  2. Envision: Once the problem or opportunity has been identified, the next step is to envision the future state of the process. This involves defining the scope of the reengineering effort, identifying the stakeholders, and developing a vision of the future state of the process. The vision should be aligned with the organization's overall goals and objectives.

  3. Diagnose: The third step is to diagnose the current state of the process. This involves analyzing the process to identify the root causes of the problem or opportunity. The analysis should be comprehensive and should involve all stakeholders. The current state analysis should also identify the process bottlenecks, inefficiencies, and waste.

  4. Redesign: The fourth step is to redesign the process. This involves developing a new process that eliminates the root causes of the problem or opportunity. The new process should be designed to achieve the goals and objectives of the reengineering effort. The redesign process should also involve all stakeholders and should be based on best practices.

  5. Reconstruct: The fifth step is to reconstruct the process. This involves implementing the new process and ensuring that all stakeholders are trained and ready to use it. The implementation should be done in phases to minimize disruption to the business. The reconstruction phase should also involve monitoring and controlling the process to ensure that it is functioning as designed.

  6. Evaluate: The final step is to evaluate the results of the reengineering effort. This involves measuring the KPIs identified in the initiate phase to determine the success of the reengineering effort. The evaluation should also identify any areas that need further improvement and provide feedback for future reengineering efforts.

Therefore, option B is the correct sequence of BPR application steps.