A user received the following error message while trying to access a shared drive: Network Path was Not Found.
Which of the following should be performed to resolve the issue? (Choose two.)
Click on the arrows to vote for the correct answer
A. B. C. D. E. F.CF.
The error message "Network Path was Not Found" usually indicates that the computer was unable to locate the shared drive on the network. To resolve this issue, the following steps can be taken:
Check the network connectivity: Ensure that the computer is connected to the network and that the network cable is plugged in properly. Also, verify that the router or switch is functioning correctly and that other devices on the network can access the shared drive.
Check the network path: Ensure that the correct path to the shared drive is being used. Verify the UNC (Universal Naming Convention) path to the shared drive by typing it into the Run command (Win + R) or File Explorer.
Reset the TCP/IP stack: This can be done by opening a command prompt as an administrator and entering the following commands in sequence: "netsh winsock reset" and "netsh int ip reset". Restart the computer after executing these commands.
Flush the DNS cache: This can be done by opening a command prompt as an administrator and entering the command "ipconfig /flushdns". Restart the computer after executing this command.
Disable the local firewall: If the local firewall is blocking network traffic, it may be preventing the computer from accessing the shared drive. Disable the firewall temporarily to test whether it is the cause of the issue.
Use static IP addressing instead of DHCP: Assign a static IP address to the computer instead of using DHCP to ensure that the IP address does not change and cause connectivity issues.
Set the NIC to full duplex: Setting the NIC (Network Interface Card) to full duplex can improve network performance and stability, but it is unlikely to resolve the "Network Path was Not Found" error message.
In conclusion, to resolve the issue of "Network Path was Not Found," the network connectivity should be checked, the network path should be verified, and the TCP/IP stack should be reset or the DNS cache should be flushed. Additionally, disabling the local firewall or using static IP addressing can also be attempted.